Wednesday, December 21, 2011

Simpson Strong-Tie Epoxy-Tie Crack-Pac Crack Repair Adhesive ETIPAC10 Injection Epoxy

Simpson Strong-Tie Epoxy-Tie Crack-Pac Crack Repair Adhesive ETIPAC10 Injection Epoxy

Simpson Strong-Tie Epoxy-Tie Crack-Pac Crack Repair Adhesive ETIPAC10 Injection Epoxy


Our Price :
Average Customer Review:

Simpson Strong-Tie Epoxy-Tie Crack-Pac Crack Repair Adhesive ETIPAC10 Injection Epoxy

The Crack-Pac® two-part, high solids, low-viscosity crack injection epoxy isdesigned to repair cracks in concrete. The mixed adhesive has the viscosity of alight oil and a low surface tension which allows it to penetrate fi ne to medium widthcracks. Resin is contained in the cartridge and hardener is contained in the nozzle.Once the nozzle is threaded onto the cartridge, the hardener is released intothe resin-fi lled cartridge by turning the knob at the base of the nozzle. The twocomponents are mixed by shaking the cartridge.APPLICATION: Suitable for repair of cracks ranging from ¹???" to ¹??" wide inconcrete walls, fl oors, slabs, columns and beams. Can be used to inject cracksin dry, damp or wet conditions with excellent results. Not for use in activelyleaking cracks.SHELF LIFE: 24 months from date of manufacture, unopenedUSAGE TEMPERATURE: In order for components to mix properly, the resinand hardener must be conditioned to 60°-80°F before mixing.STORAGE CONDITIONS: For best results, store between 45°F - 95°FCOLOR: Resin - blue, hardener - clear, mixed: light amber. The color of epoxy willchange from amber to blue during the cure process and then fade back to light amberwithin a few weeks of installation.CLEAN UP: Wipe up with cotton cloths. If desired scrub area with abrasive,waterbased cleaner and fl ush with water. If approved, solvents such as ketones(MEK, acetone, etc.), laquer thinner, or adhesive remover can be used.DO NOT USE SOLVENTS TO CLEAN ADHESIVE FROM SKIN. Take appropriateprecautions when handling fl ammable solvents. Solvents may damagesurfaces to which they are applied. Cured material - Chip or grind off surface.

Simpson Strong-Tie Epoxy-Tie Crack-Pac Crack Repair Adhesive ETIPAC10 Injection Epoxy
  • Dispenses with a standard caulking tool, no dedicated dispensing tool needed
  • Low viscosity, Non-shrink, Conforms to of ASTM C-881 Type I & II, Grade 1, Classes B & C
  • Clean and easy mixing; no additional tools required
  • Chemically bonds with the concrete to restore strength
  • Resistant to oils, salts and mild chemicals


Simpson Strong-Tie Epoxy-Tie Crack-Pac Crack Repair Adhesive ETIPAC10 Injection Epoxy



Toile Bed Best Cheap Price Mario Land Best Cheap Price

No comments:

Post a Comment